Wearable Bull Hooves for 3D Printing

You can preview the models in 3D on sketchfab

V2 : https://sketchfab.com/3d-models/bull-hooves-v2-a89d11ac1fef407e9c73045c4318964f

V1 : https://sketchfab.com/3d-models/bull-hooves-8cb79bfc884240888b76547f89e4f15c

TIPS:

V2 : This version can be printed without ratio modification (108*144*107). Even with a smaller size than the V1, it provides a 87mm wide hole (no photo available for the printed product).

V1: The model is 103*137*101m (x y z) at its default size.

For a 87mm wide at the wrist hole, you will need to print it with a 125% ratio (128*180*126) 

This version also has two declinations

- Narrow sleeve protection (fabric thickness up to 1mm)

- Thick sleeve protection (fabric thickness up to 2mm... maybe a little more)

Additionnal informations :

Print the hoof with a 120° rotation on the X axis + supports for the interdigital space (as indicated on the 3rd pic).

Really strong with a 20% infill

Please note these hooves are for personal use only. If you want to resell them, please send me a DM on twitter @OrthankTauren